2012 ARRL Field Day

Contest: ARRL Field Day
Date: June 23-24, 2011
Mode: Mixed
Period: Starts 1800 UTC Saturday; ends 2059 UTC Sunday

BAND/SSB/CW/DIGI
20 / 6 / 17 / 2
15 / 0 / 5 / 0
SCORE: 96 (TIME ON: 1 H 06 Mn)

SOAPBOX: It’s not really an event I look forward to since it’s not a “true” contest, yet many treat it as such. That is not the reason why I am not fond of Field Day. Last year I operated ‘1E’ or emergency power using a portable generator. With all the problems I encountered I only hung around for about 3 hours, got bored and turn the radio off. This year, I was hoping to use FD as a stepping stone to better my ability to run a frequency, but that never happened. I did spend about 5 minutes on 20M and only received 1 call that I could not pull out of the noise. Conditions were rather sloppy and after 30 QSOs I called it quits. For me radio should be enjoyable and during this time period I was not having fun. Why continue?

With or Without Direction?

When I took ownership of the 1968 Mercury Cougar XR-7 in 2003 I had no idea just what this project would encompass. Without any knowledge or hands on experience prior to acquiring this car I was able to find an online resource as well as a local car club that assisted me, providing information and sources to help me learn about the Cougar.

I believe my initial problem was not prioritizing the work, having a good starting point as opposed to just starting to tear the car apart. I chose the later option and soon I had a huge pile of parts, but nothing really got accomplished. After further discussion I decided to work on safety related items. Let me preface that by saying the drive down from Santa Rosa was shaky at best. The steering was terrible and it wasn’t until I torn down the front end and rebuilt it I found out why. After completing the front end I moved to rebuild the back end.

Prior to this work I had the transmission repaired in 2005 by a local shop, followed the be exhaust system. Once the front and rear end rebuilds started the cat was on blocks for about 11 months. Once completed I made a hasty decision to remove the engine in April, 2006. Reflecting back, it was probably a good idea, albeit a bit costly. Yet like the front and rear ends, the exhaust and transmission this work needed to be accomplished. Thankfully it was still during a time I had money to pay for the work on the 302 engine being rebuilt.

With more time falling by the wayside, I became discouraged with the Cougar. I was making very little progress, mainly because of my family and work responsibilities. When the engine returned about 4 months later (2006) I had was bitten again. Much like previous attempts, time and money were against me. I was able to find time to start cleaning the engine compartment with the goal of painting it black and reinstalling the engine.

That puts me where I am today, in a quandary as to where to begin. With the small repair made last week in the engine compartment I am thrilled to be finding some time to invest into the Cougar. Making the car drivable in the near future isn’t the current goal. I feel with many of the major parts removed from the car it could be in my best interest to fix what’s broken or replace parts due to age before working on the body in order to prep it work painting. Thankfully I have a friend who is an expert in the bodywork and painting of cars to help lead me.

The cleaning of grime, the sanding of rust and removal of sprayed undercoating continues. I am still thankful the car is not a rust bucket. While there is quite a bit of surface rust, I don’t have any major areas that will push though, like the battery tray did. I can’t even put a time frame on the completion of the cleaning of rust at this time. The engine compartment is about 90% cleaned at this time and I still need to remove some hoses and wiring harness, as well as the steering column before I can finish the remaining 10%.

I also need to inventory the new parts I have. As I mentioned, I spent quite a bit of money on new parts that are still in the box. I never opened them since I was not ready to replace them. So while I am still without a real starting point, I have much work to accomplish. Maybe jumping around from area to area is way to go. Who knows maybe it will be sooner than I expect that I could have accomplished enough work that the Cougar might actually start and roll with a driver behind the seat.